Connector Pin Number Signal
7 Request to send (not used)
8 Not used
9 Ring indicator (not used)
Table 10: RJ–45 Console port pin assignments
Connector Pin Number Signal
1 Ready to send (RTS) — optional
2 Data terminal ready (DTR) — optional, can swap or link with pin
8
3 Transmit data (TXD) — mandatory
4 Carrier detect (DCD) — optional
5 Ground (GND) — mandatory
6 Receive data (RXD) — mandatory
7 Data set ready (DSR) — optional
8 Clear to send (CTS) — optional, can swap or link with pin 1
Power specifications for the Avaya Virtual Services
Platform 4000
This section describes power specifications for the Avaya VSP 4000 switches.
Power specifications for Avaya VSP 4000 4450GTX-HT-PWR+
switch
The following table describes the regulatory AC power specifications for the Avaya Virtual Services
Platform 4000 Series 4450GTX-HT-PWR+ switch. The regulatory power specifications are based on
the maximum rated capacity of the power supplies and are not based on typical power consumption
which is lower.
Table 11: AC power specifications
48450GTX-HT-PWR+
Input Current: 16.66A/8.33A
Input Voltage (rms): 100 to 240VAC at 50 to 60 Hz
Power Consumption: • Without PoE+
- Typical: 100W
Power specifications for the Avaya Virtual Services Platform 4000
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 25
Comments? infodev@avaya.com
To Next Page
Loading...
