Label Color and Status Description
Green, Steady The link is operating normally.
Off No link exists.
Note:
If you connect two ports explicitly set for different speeds (for example one configured as
10BaseT and the other as 100BaseTX) the port link LED may indicate a link, but the switch
does not establish a link. Connect ports using the same set speed or use auto-negotiation on
each switch.
Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 35
Comments? infodev@avaya.com
To Next Page
Loading...
