Avaya 8410B - Page 21

left half of the Speaker Volume control button.
{
The display shows the current volume level.
On the display, one arrow indicates the lowest setting, and eight arrows indicate the highest setting.
Note: There are eight possible volume settings.
To change from the speaker to the handset:
Use the following procedure if your telephone is set for the Speaker (listen-only) feature.
1. Pick up the handset.
{
The red light next to
Speaker
goes off.
{
The red light next to
Mute
goes off.
{
The speaker goes off.
To change from the handset to the speaker:
Use the following procedure if your telephone is set for the Speaker (listen-only) feature.
1. Press
Speaker
.
{
The red light next to
Speaker
goes on.
{
The red light next to
Mute
goes on.
{
The speaker is active, and the handset is turned off.
To prevent the other party from hearing you:
Use the following procedure if your telephone is set for the Speaker (listen-only) feature.
1. Press
Mute
.
{
The red light next to
Mute
goes on.
{
The other person cannot hear you.
2. Press
Mute
again to resume speaking to the other person.
{
The red li
g
ht next to
Mute
g
oes off.
Pa
g
e 21 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm