Avaya 8410B - Page 22

{
The other person can hear you again.
To end a call when using the speaker:
Use the following procedure if your telephone is set for the Speaker (listen-only) feature.
1. Press
Speaker
.
{
The red light next to
Speaker
goes off.
{
The red light next to
Mute
goes off.
Note: If you are uncertain whether your telephone is set for the Speaker (listen-only) feature or the Speakerphone (listen and speak) feature, check with your system manager.
Use the following procedures if your telephone is set for the Speakerphone (listen and speak) feature.
To place or answer a call using the speakerphone:
1. Press
Speaker
.
{
The red light next to
Speaker
goes on steadily.
2. Place or answer a call, or access the selected feature.
3. Adjust the speakerphone volume if necessary.
To raise the volume, press the right half of the Volume control button. To lower the volume, press the left half of
the Volume control button.
{
The display shows the current volume level.
On the display, one arrow indicates the lowest setting, and eight arrows indicate the highest setting.
Note: There are eight possible volume settings.
Note: The Volume control does not affect an external speakerphone attached to your telephone.
To change from the speakerphone to the handset:
Use the following procedure if your telephone is set for the Speakerphone (listen and speak) feature.
1. Pick u
p
the handset and talk.
Speakerphone
Pa
g
e 22 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm