3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Edit Dialing.
If your telephone does not display this option, your administrator has not made this
feature available.
7. Press Change or OK to change the setting to On (Enabled) or Off (Disabled).
When on-hook dialing is in effect, dialpad (edit dial) searches are not available.
8. Press Save.
Setting Headset Signaling
About this task
You can set your deskphone to ring through your headset and the speaker. This might be
convenient if you want to turn the speaker alert off or you have a wireless headset.
Note:
Not all headsets support audible alerts.
Procedure
1. Press Home.
2. Select Options and Settings.
3. Select Call Settings.
4. Select Headset Signaling.
5. Select from the three settings using the corresponding buttons.
• None: No ringing tone is sent to the headset. Headset remains on hook till
headset switch-hook button is pressed for an incoming call.
• Switchhook and Alerts: Every 5 seconds the phone plays an alert tone in the
headset on an incoming call. Both switch-hook buttons of the headset and the
phone work for an incoming call.
• Switchhook only: The phone does not send the ringing tone to the headset.
Headset switchhook button is non functional.
6. Press Save to save the setting or Cancel to return to the menu without saving.
Options & Settings
Using Avaya IP Deskphone H.323 9608, 9608G, and 9611G January 2014 23
To Next Page
Loading...
