Avaya 9608 - Using Pictures from Your USB Device as a Screensaver

Any changes or updates you make to your contacts list while the USB device is
connected affect only the temporary file on the USB device, and not your “regular”
telephone contacts list.
Using pictures from your USB device as a screensaver
About this task
If your USB device has a top level directory named \Pictures or another picture directory
that is properly administered, you can use pictures in that directory as your phone's
screensaver.
Each picture displays for 5 seconds unless you specify a different value (from 5 seconds to
999 seconds). The maximum allowable height and width for each picture on a 9611G IP
deskphone is 320 x 240 pixels.
A picture file must be in JPEG (.jpg or .jpeg) format. Your administrator can help you set up
this feature. Your administrator can also disable this feature, in which case the My Pictures
option will not appear on the Avaya Menu.
In addition to the features described in the
Using USB Flash Drives with your phone on
page 59 the Avaya one-X
®
Deskphone USB Companion application includes a utility program
to convert your pictures to the correct format.
Procedure
1. Plug the USB device into the jack near the center top edge of your phone.
2. On the phone, press the Home button.
3. Select My Pictures to immediately begin displaying the pictures from your USB
picture directory on the phone and then whenever the screen display “times out”
after the administered idle period.
Note:
If you disconnect the USB device from the telephone, the standard screensaver
replaces your pictures after the designated idle period.
Using USB Flash Drives with your phone
62 Using Avaya IP Deskphone H.323 9608, 9608G, and 9611G January 2014
Comments? infodev@avaya.com