EasyManua.ls Logo

Avaya 9608 - Ringing on Wireless Headsets

Avaya 9608
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ringing on wireless headsets
For an incoming call, you can set the ringing tone on the wireless headset instead of the
speaker of the deskphone.
Note:
This feature is available only if enabled by your administrator for your deskphone.
When you go off-hook with the headset or change from a non-headset device to the headset,
the wireless headset is activated. When you go on-hook with an activated headset or change
from wireless headset device to non-headset, the wireless headset is deactivated.
When an incoming call arrives:
If the deskphone is in an idle mode, a ringing tone is heard in the wireless headset.
If the phone is already in a headset call, a short beep is heard in the wireless headset.
About Features
36 Using Avaya IP Deskphone H.323 9608, 9608G, and 9611G January 2014
Comments? infodev@avaya.com

Table of Contents

Other manuals for Avaya 9608

Related product manuals