of a line. By changing the screen size, the screen effectively splits in half or turned
from half to full.
8. Press Save.
Changing the ring pattern
Procedure
1. Press Home.
2. Select Options & Settings or Phone Settings.
3. Select Screen & Sound Options.
4. Press Select or OK.
5. Scroll to Personalized Ringing and press Change.
Two ring tone categories are available — Classic or Rich. Each category contains
eight distinctive ring patterns.The ring tone currently selected displays on the status
line and a list of all eight ring tones within that category displays with a checkmark
next to the pattern currently selected. The phone displays the Rich category ring
tones by default. The softkey Classic indicates the other ring tone category, to allow
you to switch between categories.
6. Select a displayed ring pattern, or press the alternate ring tone category softkey that
the phones labels as Rich or Classic to select from the eight ring patterns.
Tip:
Use the Rich/Classic softkey to toggle between the two sets of patterns.
7. If necessary, scroll through the patterns and select one. The phone plays the ring
tones once through the speaker as you scroll through the list. Press OK to listen to
selected ring tone again.
8. Press Save to make save your selection.
Changing the display language
Procedure
1. Press Home.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Screen & Sound Options.
Options & Settings
Using Avaya IP Deskphone H.323 9608, 9608G, and 9611G January 2014 29
To Next Page
Loading...
