No. Task Reference Avaya recommendation
provided
equipment).
4 Verify that the
rack is installed
according to the
manufacturer's
instructions and
in accordance
with all local
codes and laws.
User Guide:
Installing the
server into the
rack
To install the server into a rack with square, round, or
threaded holes, refer to the instructions that ship with the
rack hardware kit.
5 Verify that the
rack is grounded
in accordance
with local
electrical code.
User Guide:
Electrical
grounding
requirements
The server must be grounded for proper operation and
safety.
6 Determine and
plan the vertical
spacing of the
servers in the
frame.
User Guide:
Space and
Airflow
Requirements
Servers draw in cool air through the front and expel warm air
through the rear. Therefore, the front rack doors must be
adequately ventilated to allow ambient room air to enter the
cabinet, and the rear door must be adequately ventilated to
allow the warm air to escape from the cabinet.
7 Attach the rails to
the rack.
User Guide:
Installing the
server into the
rack
To install the server into a rack with square, round, or
threaded holes, refer to the instructions that ship with the
rack hardware kit. If these rails do not fit the rack the
customer must provide rails or a shelf for rack installation.
Also the rails included with the server might not work with
round hole racks, in which case the customer can obtain rails
and/or a shelf from a distributor. (RackSolutions.com)
8 Attach the server
to the rack.
User Guide:
Installing the
server into the
rack
Warning:
This server is very heavy. To reduce the risk of personal
injury or damage to the equipment:
• Get help lifting and stabilizing the product during
installation or removal, especially when the product is
not fastened to the rails. HP recommends that a
minimum of two people are required for all rack server
installations. A third person may be required to help
align the server if the server is installed higher than
chest level.
• Use caution when installing the server in or removing
the server from the rack; it is unstable when not
fastened to the rails.
9 Connect the
peripheral
devices to the
server.
User Guide:
Setup
• Connecting
peripheral
Network connections, power cords
See Avaya application installation documentation.
Table continues…
Installing the new streaming and recording server
August 2017 Installing the Avaya Equinox Streaming and Recording Server 44
Comments on this document? infodev@avaya.com
To Next Page
Loading...
