If you have configured a DN and you run the configuration utility again, you can add or
remove a virtual delivery node (VDN) or an external storage device without disturbing the
server configuration.
3. On the End-User License Agreement screen, select I accept the terms of the License
Agreement to accept the license agreement.
4. Click Next.
5. On the Select Configuration screen, select your deployment type.
For more information, see
Deployment types on page 16.
Figure 7: Select Configuration
6. On the Deployment Type screen, perform one of the following actions:
• If you have selected All-in-One on the Select Configuration screen, select Enterprise
deployment or Multi-tenant to match your Equinox Management deployment.
Figure 8: Deployment Type
• If you have selected Content management components only on the Select
Configuration screen, select Enterprise deployment or Multi-tenant to match your
Equinox Management deployment. The screen is similar to
Figure 8: Deployment Type on
page 48.
Installing the new streaming and recording server
August 2017 Installing the Avaya Equinox Streaming and Recording Server 48
Comments on this document? infodev@avaya.com
To Next Page
Loading...
