If you are using the Avaya Scopia Content Center Streaming and Recording Server, you need to
configure and manage the servers using the Avaya Scopia Desktop Server. For more information,
see the Administrator Guide for Avaya Scopia Desktop Server, which is from a previous release and
is available on
support.avaya.com.
Important:
Once you configure a Equinox Streaming and Recording Server you cannot revert back to the
Scopia Content Center Streaming Server or the Scopia Content Center Recording Server.
Procedure
1. Access the Equinox Management administrator portal.
2. In the Devices tab, select Streaming & Recording Server.
3. If you are modifying the Equinox Streaming and Recording Server, select the link in the
Name column, or select Add to create the Equinox Streaming and Recording Server profile.
The Add Streaming & Recording Server page appears (
Figure 19: Adding an Avaya
Equinox Streaming and Recording server on page 74).
Figure 19: Adding an Avaya Equinox Streaming and Recording server
4. Configure the Equinox Streaming and Recording Server’s settings, as described in (Table
14: Configuring the Avaya Equinox Streaming and Recording on page 74).
Table 14: Configuring the Avaya Equinox Streaming and Recording
Field Name Description
Name Enter a name to identify the Equinox Streaming and Recording Server.
IP address/FQDN Enter the management IP address or the FQDN of the Equinox
Streaming and Recording Server. This is the address that clients use
to access the Equinox Streaming and Recording Server portal within
Table continues…
Installing the new streaming and recording server
August 2017 Installing the Avaya Equinox Streaming and Recording Server 74
Comments on this document? infodev@avaya.com
To Next Page
Loading...
