EasyManua.ls Logo

Avaya S8700 - Page 504

Avaya S8700
700 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Object Repair Procedure
555-233-142
8-1200 Issue 1 May 2002
1145 ABORT There is congestion in the network.
1. Issue the status tsc-administered command at 1-minute intervals up to 5
times.
2. If the congestion does not clear, disable and enable the Administered TSC
via the change sig-group <group> command.
NOTE: To disable the Administered TSC, display the (administration)
Signaling Group Form via the change sig-group <group> command
where <group> refers to the number of the signaling group under which the
suspect TSC is administered. Change the Enable field to n. To enable
the ADM TSC, change the Enable field to y.
3. If the congestion still does not clear, check other nodes in the network.
1146 ABORT The congestion just occurred in the network.
1. Issue the status tsc-administered command at 1-minute intervals up to 3
times.
2. If congestion does not clear, disable and enable the Administered TSC via
the change sig-group <group> command.
NOTE: To disable the Administered TSC, display the (administration)
Signaling Group Form via the change sig-group <group> command
where <group> refers to the number of the signaling group under which the
suspect TSC is administered. Change the Enable field to n. To enable
the ADM TSC, change the Enable field to y.
3. If congestion still does not clear, check the other nodes in the network.
1147 ABORT The ADM TSC is being torn down.
1. Issue the status tsc-administered command at 1-minute intervals up to 3
times.
2. If ADM TSC is still down, disable and enable the ADM TSC via the change
sig-group <group> command.
NOTE:
To disable the ADM TSC, display the (administration) Signaling Group
Form via the change sig-group <group> command where <group>
refers to the number of the signaling group under which the suspect TSC
is administered. Change the Enable field to n. To enable the ADM
TSC, change the Enable field to y.
3. If the ADM TSC is still down, check the other nodes in the network.
Table 8-511. Test #604 TSC Heartbeat Inquiry Test Continued
Error
Code
Tes t
Result Description / Recommendation
Continued on next page

Table of Contents

Other manuals for Avaya S8700

Related product manuals