Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Configuring Basic
Settings with the Quick Setup Wizard on page 98.
Procedure
1. Define the name and language as described in
Table 18: Defining name and language of the
XT Series on page 100.
Figure 60: Setting Country and Language
Table 18: Defining name and language of the XT Series
Field Description
System Name Enter the name of the XT Series in the System Name field. This
name is also used by default for the SIP username and the H.323
name, which can be manually changed.
System Name Unicode (Editing in the Web interface only) Enter the name here if it includes
non-ANSII characters such as Chinese or Japanese.
Country Enter the country location of the unit. The system menu and the
Language field automatically changes to the language used in the
selected country.
Language Choose the language of the graphical menu. The web menu
language can be changed in each web client without impacting the
system GUI.
Protocol Type Select the protocol the endpoint should use for calls, depending on
the organization’s existing infrastructure (SIP or H.323–based).
Contact your administrator for more information.
• H.323: Select if you are registering the endpoint to a gatekeeper
only. The wizard displays the gatekeeper configuration page. For
more information, see Configuring Basic Gatekeeper Settings on
page 104 or contact your administrator.
• SIP: Select if you are registering the endpoint to a SIP server only.
The wizard displays the SIP server configuration page. For more
information, see Configuring Basic SIP Settings on page 105 or
contact your administrator.
Table continues…
Initial Configuration of the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 100
Comments on this document? infodev@avaya.com
To Next Page
Loading...
