3. Perform the Quick Setup wizard, which ends with the Avaya Scopia
®
XT Control installation,
or install it at any time from the web interface.
Procedure
1. The Quick Setup wizard provides the web address to access your endpoint from the web,
and displays a user code to pair a computer's keyboard and mouse to the endpoint. You
enter this code at the end of the installation, so make a note of it now.
Figure 64: Installing Avaya Scopia
®
XT Control from the Quick Setup
2. Select Minimize to remove the window and expose your computer content.
3. Access the XT Series web interface, as described in Accessing XT Series Web Interface on
page 80.
4. In the main web page of the endpoint, in the Home > XT Control section, select Create
package (
Figure 65: Installing Avaya Scopia
®
XT Control for Windows on page 107).
Figure 65: Installing Avaya Scopia
®
XT Control for Windows
5.
For Mac users only, copy the setup package to a folder on your computer, and launch the
Avaya Scopia
®
XT Control:
You may need to follow the steps in Resolving download problems on page 251.
6. For Windows users only, launch the installation package:
a. Select Next in the installation wizard and select to install Avaya Scopia
®
XT Control.
b. Select the installation folder and click Next.
c. Choose a location in the Start menu, and select Install.
d. Select Finish.
Configuring Basic Settings with the Quick Setup Wizard
January 2017 Avaya Scopia
®
XT Series Deployment Guide 107
Comments on this document? infodev@avaya.com
To Next Page
Loading...
