•
The audio input port is for:
- The analog One-way Microphone Pod or any other analog microphone with a 3.5mm jack.
- A third-party digital microphone with a mini-TOSlink connector.
- Audio mixers like those from Clear One. An audio mixer connects multiple microphones (or
other audio inputs) to generate a single audio stream.
- A computer audio-out connection or line audio connection.
Figure 78: Audio input ports on the XT Series
You define settings for each type of audio device, not per port on the XT Codec Unit. Therefore
there are separate settings for each type of microphone, even when some would share the same
type of connection.
Before you begin
Choose and then connect the analog audio equipment you need as described in
Connecting
Microphones and Speakers to the XT Series on page 61.
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 129.
Procedure
1. Access the Audio-Input settings. From the XT Series web interface, select Administrator
settings > I/O connections. From the endpoint's main menu, select Configure >
Advanced > I/O connections > Audio - Input.
2. Select the type of audio input you want to configure.
Configuring Microphones
January 2017 Avaya Scopia
®
XT Series Deployment Guide 121
Comments on this document? infodev@avaya.com
To Next Page
Loading...
