The contacts are read-only when browsing a remote XT Series's LDAP server. You can access
more than one of these LDAP servers, where each requires only the IP address of the remote
endpoint and its LDAP password.
• Equinox Management's built-in LDAP server
If the end point is connected to the cloud for auto-provisioning, the LDAP server is
automatically configured by Equinox Management.
The contacts of this server are read-only from the endpoint. You can define more than one
such server, specifying each IP address, port, and its LDAP username and password. The
resulting contact list is filtered to show only users with an endpoint associated with them.
Important:
If the Equinox Management LDAP server has a Root DN defined, you must specify the
RootDN field when accessing that LDAP server.
• A third-party LDAP server, such as Polycom CMA The contacts are read-only. You can access
more than one of these LDAP servers, where each requires only the IP address of the remote
endpoint and its LDAP password.
• A generic LDAP server, such as Microsoft Active Directory.
The contacts of the generic LDAP are read-only from the endpoint. The LDAP tree must have
the following specific structure and naming conventions:
- The Root DN must be defined. For example, dc=company, dc=com.
- All users (inetOrgPerson entities) must be located under an organizational unit (ou) in the
LDAP tree. For example, ou=people.
- All endpoints (commObject entities) must be listed under an organizational unit called
h323Identity if they are to work with H.323, and SIPIdentity if they are to work as SIP
endpoints.
Since the XT Series works both as an H.323 and a SIP endpoint, all XT Series commObject
s should be listed under both organizational units.
- Each endpoint is represented by a commObject with its commUniqueId. Each
commObject contains the details of accessing this endpoint, and the user associated with it.
Define the following fields:
Table 45: commObject fields
Field
Value Comments
objectClass commObject Use this exact value
objectClass h323Identity Use this exact value
commOwner uid=<x>,ou=people,dc=company,d
c=com
The user ID associated with
this endpoint
h323IdentityEndpointType Terminal Use this exact value for H.
323 endpoints only
Table continues…
Configuring XT Series to use LDAP Directory
January 2017 Avaya Scopia
®
XT Series Deployment Guide 159
Comments on this document? infodev@avaya.com
To Next Page
Loading...
