Field Value Comments
h323IdentitytransportID <ip address>
At least one of these fields
must be defined for an H.
323 endpoint.
h323IdentitytransportDigits <E.164 dial number>
h323IdentitytransportNumber <H.323 alias>
h323Identityh323-ID <H.323 alias>
SIPIdentitySIPURI <URI address of SIP endpoint> SIP endpoints only.
- Each user (inetOrgPerson entity) must have its commURI field pointing to the user's
endpoint (commObject ID). For example:
ldap://123.456.789.012/ou=h323identity,dc=company,dc=com??sub?(commUniqueId=6) XT5000
where commUniqueId refers to the commObject ID.
A centralized solution like Equinox Management enables synchronizing the same list of contacts
across all the endpoints in your organization, and has other benefits like remote centralized
upgrading and backing up of all endpoints in your video network. You can configure the XT Series to
use Equinox Management as the LDAP directory also from the Avaya Equinox Management
administrator portal (for details, see the Administrator Guide for Avaya Equinox Management).
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 129.
If you are using Avaya Equinox Management as the LDAP directory, you must associate LDAP
contacts to video endpoints; otherwise these contacts are not displayed on the XT Series. You must
also ensure that LDAP Contacts are enabled on your Equinox Management. Each LDAP contact on
the XT Series can only be mapped to a maximum of ten video endpoints.
Procedure
1. Access the LDAP settings. From the XT Series web interface, select Administrator
Settings > System > LDAP. From the endpoint's main menu, select Configure >
Advanced > System > LDAP.
From the endpoint interface
From the web interface
Figure 106: Configuring LDAP settings from the web interface
2. Select Add or Add Server.
Advanced Configuration of the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 160
Comments on this document? infodev@avaya.com
To Next Page
Loading...
