From the endpoint interface From the web interface
I need to obtain this graphic from Laura
Figure 145: MCU Preferences
2. Set the fields as described in Table 60: Limiting or Disabling Access to Built-in MCU on
page 202.
Table 60: Limiting or Disabling Access to Built-in MCU
Field Name Description
Enable Enable/disable meeting hosting.
Display Participants
Name
Select Yes to display the participant name over the video. Select No to
display video without the participant name.
Meeting Time Limit Specify the maximum duration of the meeting.
Max Calls Limit Enable/disable to set a maximum number of participants in a meeting.
Max Calls Specify the maximum number of participants in a meeting.
Local Audio-Video Select No to ensure that the local audio and video is not sent when XT
Series is hosting a meeting. Select Yes to send the local audio and video
when XT Series is hosting a meeting.
Hide Meeting Select Yes to hide the remote audio and video when XT Series is hosting a
meeting. This setting prevents local participants from accessing meetings
unless they have a PIN. Select No to display the remote audio and video
when XT Series is hosting a meeting. This setting enables local participants
to access meetings, even if they do not have a PIN.
Allow WEB
Management
Select No to disable web management when XT Series is hosting a hidden
meeting. Select Yes to enable web management when XT Series is hosting
a hidden meeting.
Default Layout Specify the default layout when hosting a meeting in continuous presence
mode.
Default Lecturer
Layout
Specify the default layout when hosting a meeting in lecturer mode.
• Select 1 terminal to enable enhanced lecture mode. In enhanced lecture
mode, the XT Series hosting the meeting sends the local participant video
Table continues…
Securing your XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 202
Comments on this document? infodev@avaya.com
To Next Page
Loading...
