Related links
Securing Connections to the XT Series Using TLS on page 203
Uploading the CA root certificate manually on page 209
Uploading a PKCS#12 file on page 210
Uploading the CA root certificate manually
Before you begin
You must perform this step separately for TLS and Web.
Procedure
1. From the XT Series web interface, select Administrator Settings > Utilities >
CertificatesTLS or Administrator Settings > Utilities > CertificatesWeb.
2. Import the Certificate Authority (CA) root certificate as follows:
Figure 152: Uploading the CA root certificate
a. Select Choose File (next to Step 3) and browse to the CA root certificate you received
from the CA.
b. Select Upload.
3. Import the signed certificate you received from the CA, as follows:
Figure 153: Uploading the signed certificate
a. Select Choose File (next to Step 4) and browse to the signed certificate you received
from the CA.
b. Select Upload.
The certificate is validated and its details appear (
Generating a Certificate Signing Request
for XT Series on page 205).
Tip:
Verify the system's time is synchronized with SNTP, otherwise you may need to wait a
few hours before using this certificate (for details, see
Setting Date and Time on
page 108). You can start using this certificate from the time in the notBefore field in the
signed certificate. The certificate is no longer valid after the date in the notAfter field has
elapsed.
Securing Connections to the XT Series Using TLS
January 2017 Avaya Scopia
®
XT Series Deployment Guide 209
Comments on this document? infodev@avaya.com
To Next Page
Loading...
