Avaya Scopia XT7000 Series - Page 79

Before you begin
To access the endpoint's main menu using your keyboard and mouse, you must first perform the
following procedures:
1. Connect your computer to the XT Executive to use it as your computer's monitor (see
Connecting a Computer to the XT Series on page 67).
2. Perform the initial setup described in Configuring Basic Settings with the Quick Setup
Wizard on page 98. The last step of the quick setup wizard is installing the Avaya Scopia
®
XT Control utility (see
Installing Avaya Scopia
®
XT Control to Use Keyboard and Mouse (XT
Executive) on page 106).
Procedure
1.
Select the Avaya Scopia
®
XT Control icon in your taskbar:
The icon turns gray indicating the keyboard and mouse control the endpoint navigation, the
menus appear on the screen, and the mouse cursor is now a square . Move the mouse all
the way to the edge of the screen to ensure the square icon follows its movements.
Important:
On the XT Executive, the system menus are automatically activated when you receive
an incoming call to allow you accept or reject the call.
2. Avaya Scopia
®
XT Control enables a number of functions using the keyboard or mouse (see
Table 11: Using the keyboard or mouse with Avaya Scopia
®
XT Control on page 79).
Table 11: Using the keyboard or mouse with Avaya Scopia
®
XT Control
Function Using your keyboard Using your mouse Using XT Remote
Control Unit
Select an option Press Enter. Click on the option. Press ok/menu.
Enter text Use the keyboard. N/A Use the XT Remote
Control Unit keypad to
enter letters and digits.
Table continues…
Navigating Menus with the Keyboard and Mouse
January 2017 Avaya Scopia
®
XT Series Deployment Guide 79
Comments on this document? infodev@avaya.com