Figure 51: Pre-provisioning an Endpoint Page — Server and Endpoint Service Codes
4. Optionally, select Duplicate Settings... at the top of the page to copy settings from another
endpoint. The following dialog box opens, where you enter the XT endpoint name in the
provided cell to indicate from where you want to copy settings.
Figure 52: Duplicate Settings Dialog Box
5. On the Pre-provisioning an Endpoint page, configure the values for the endpoint in the
Basic Settings section:
Table 13: Basic Settings Fields
Field Name Description
Name The name of the endpoint
Username (H.323 ID) The H.323 username of the endpoint (displayed in H.323 calls)
Phone number (E.164): The phone number of the endpoint
Location The location of the endpoint
Table continues…
Provisioning the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 86
Comments on this document? infodev@avaya.com
To Next Page
Loading...
