EasyManua.ls Logo

Avaya Scopia XT7000 Series - Page 87

Avaya Scopia XT7000 Series
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Field Name Description
Registered To The gatekeeper to which the endpoint is registered or the first
SIP server
Auto-answer The frequency policy by which the endpoint answers incoming
calls. Select from the following:
Yes, always
Never
Yes, if not in a call
Yes, trusted always
Yes, trusted if not in a call
Note:
When selecting either of the last two options, only contacts
configured as trusted are accepted when the specified
condition is met. For details on configuring trusted contacts,
see Blocking All Calls Except From Trusted Contacts in the
Avaya Equinox Solution XT Series User Guide.
Automatic IP Address Indicates whether the IP address is to be obtained automatically
by the system
IP Address The IP address of the endpoint; enabled only when the
Automatic IP Address field value is No.
Subnet Mask The subnet mask of an endpoint’s IP network; enabled only when
the Automatic IP Address field value is No.
Default Gateway The default gateway server to which the H.323 endpoint is
connected; enabled only when the Automatic IP Address field
value is No.
DNS Server The server used to resolve the domain name of the endpoint;
enabled only when the Automatic IP Address field value is No.
Ensure that a valid DNS is assigned. It can be manually
configured or automatically filled by the DHCP server. If the DNS
resolution of the cloud service address does not work, the
provisioning will not be applied and the XT Series cannot be
managed in cloud mode.
Set Equinox Management as
Corporate Directory Server
Sets Equinox Management as the corporate directory, so that
user searches are done in the Equinox Management corporate
directory. When selecting this check box, the Username and
Password fields appear, where you enter the username and
password of the corporate directory server.
6. Expand the QoS Settings section, and configure the relevant options.
Provisioning Avaya Scopia
®
XT Series Endpoints Automatically
January 2017 Avaya Scopia
®
XT Series Deployment Guide 87
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya Scopia XT7000 Series

Related product manuals