Table 14: QoS Settings Options
Field Name Description
Use QoS Select to activate QoS (Quality of Service) and either guarantee
a specified level of data stream performance (Precedence/TOS)
or configure the priority of the different data streams (DiffServe).
When this check box is not selected, the other fields in this
section are disabled.
Precedence/TOS When selecting this option, the data stream sections (Audio,
Video, Data, and Signal) display the following fields:
• TOS: Select the type of service for the data stream
• Precedence: Select the precedence value for the data stream
The selected values must be identical across all other network
components, and for all remote endpoints that connect in
videoconferences.
DiffServe When selecting this option, the data stream sections (Audio,
Video, Data, and Signal) display the DiffServ.(0–63) field,
where you configure the custom priority value, also known as
differentiated service or DiffServe. The values must be identical
for all elements in your network, and for all remote endpoints that
connect in videoconferences.
7. Expand the Encryption Settings section, and configure the relevant options:
Table 15: Encryption Settings Options
Field Name Description
Enable Encryption Select to enable encrypted communication with the endpoint.
When selecting the Enable Encryption check box, the following
fields are enabled:
• Enable Encryption MCU: Select to enable encryption with the
MCU.
• SIP Proprietary Encryption: Select to encrypt SIP calls with
XT Series terminals, where TLS is not supported. When TLS is
supported in the remote XT Series terminal, this field is not
relevant, as TLS encrypts the calls.
We recommend upgrading your XT Series terminals to enable
TLS in SIP calls, to ensure maximum security.
• Audio Alert: Select to generate an audio message with the
encryption status for meeting participants.
• Unprotected Calls: Select the desired behavior for
unprotected calls:
- Disconnect
- Ask Confirmation
Provisioning the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 88
Comments on this document? infodev@avaya.com
To Next Page
Loading...
