Avaya Scopia - Installing the Avaya Scopia Streaming and Recording Server; Installation Checklist

Figure 13: Sliding the device onto the rails
Important:
To pull out the device, you need to slide the long part of the latch on each side
simultaneously to release the safety lock. Slide the right latch up and slide the left latch
down (Figure 14: Removing the device from the rails on page 18).
Figure 14: Removing the device from the rails
3. Secure the device to each front post using a long screw. Insert a washer between the screw
and the device panel.
Installation Guide for Avaya Scopia
®
Application Server Version 2 Setting up the Device | 18