AVer SVC100 - Page 88

82
Account Active
Select “
Account Active
” check box and press
to activate/deactivated.
Next, go to
Register
button and press to
register to the SIP server.
Become a Server:
Select Operating Mode is “Become a Server” in SIP Configuration. Then, enter the
following information to be a SIP server.
Authentication Mode
Select authenticate way to authorize SIP client.
Anonymous:
No password required for any SIP
client.
Password:
Password is required for SIP client
to connect SIP server. Set the password in
Password column.
Password
When authentication mode is Password mode, a
password is required to be set. The default
password is “
1234
”.