3 — Operation
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 3 - 11
After cutting the product, re-position the
product holder towards the operator. By
pressing pushbutton the rotation of the
blade stops. Re-position the slice thickness
control to zero and unload the product.
How to load short goods to be cut
(last slice)
WARNING:
THE SHARPENING OPERATION
MUST BE PERFORMED DURING
THE MANUAL FUNCTIONING.
WARNING:
DO NOT USE YOUR HANDS TO
PUSH THE GOODS TOWARDS THE
BLADE, FOLLOW THESE
INSTRUCTIONS WITH GREAT
CARE.
1. Check that the slice thickness control
is on zero and the slicer is off.
To Next Page
Loading...