7 — Appendices
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 7 - 9
Control of the functions
The control is effected by sliding the DIP SWITCH no. 15 to position ON
Illuminated
indicator
no. Description of the function
1 Mains power applied to the board.
2 Blade cover microswitch if fitted on the machine.
3 Blade cover microswitch and sharpener microswitch when both of them are
fitted on the machine
4 Blade motor start pushbutton.
5 Blade motor stop pushbutton.
6 Proximity microswitch on the handle “MANUAL-AUTOMATIC”; it can be
checked only with the blade motor on.
7 Carriage motor stop pushbutton; it can be checked only with the blade motor
on.
8 Carriage motor start pushbutton; it can be only checked with the blade motor
on.
9 Carriage end stroke on the blade
10 Carriage end stroke on the operator side.
11A Board electronic side; it illuminates when the blade and carriage motor are
working.
11B Board electronic side when the carriage returns towards the operator; it
illuminates when the blade and carriage motor are working.
Components
12 Integrated MOC 3040
13 Integrated MOC 3040
14A Fuse: 160mA tension 220/50Hz
200mA tension 110V/50Hz
14B Fuse: 500mA
800mA for the Slice counter
15 Switch
16 Transformer
17 Relay
35 Trimmer to adjust the carriage stroke
To Next Page
Loading...