7 — Appendices
7 - 10 Service Instructions RP-A301CE/RP-A351CE/RP-A355CE
WARNING:
SLICER SHOULD NOT BE OPERATED BY UNTRAINED
PERSONNEL OR PERSONS UNDER 18 YEARS OF AGE.
Manual operation
1 Rotate the AUTO/MANUAL selector carriage release handle by 180,
clockwise
2 Push the on switch/blade start pushbutton
3 Adjust the thickness you want by turning the slice thickness control knob
4 Actuate the carriage by your hand
5 Push the off switch/blade stop pushbutton
Automatic operation
1 Rotate the AUTO/MANUAL selector carriage release handle by 1800,
anticlockwise
2 Push the on switch/blade start pushbutton
3 Adjust the thickness you want by turning the slice thickness control knob
4 Push the product holder start pushbutton
5 Adjust the length of the stroke by turning the product holder stroke
adjustment knob
6 Push the product holder stop pushbutton to stop the carriage
7 Push the off switch/blade stop pushbutton
To Next Page
Loading...