Avery Dennison ADTP1 MonarchNet2 - Page 16

2-10 MonarchNet2 Operating Instructions
*PEAP This is only for server-side certificates.
*Optional Leaving the Certificate Root Key and the Certificate CN (common) names blank, no
validation of the host certificate is performed. The values are set to “null” and all host
certificates are accepted.
*Required The Wireless module comes with a default Private Key Information File. You can either
download that file from the wireless module and add it to the TLS authentication server,
or overwrite a new one on the wireless module.
*PAC EAP-FAST does not use certificates to authenticate, but a PAC (Protected Access
Credential), which is managed dynamically by the server. The PAC is distributed one
at a time to the client manually or automatically.
See the following table of acceptable combinations:
Encryption
Authentication
WEP
WPA, WPA (TKIP), WPA2
Open
Static No
Shared
LEAP
Dynamic Yes
PEAP
EAP-FAST
TLS*
TTLS
*Load the local key before enabling TLS.