3-4 MonarchNet2 Operating Instructions
Sets server node name.
SHow FREE
Shows amount of available memory.
SHow PRN FEEdlabel
Feeds a label.
SET PRN FIRMWARE
Sets the printer in boot loader mode to reload the firmware.
SHow PRN KEYpad
Shows the current status of the keypad lock.
SET PRN KEYpad [LOck/UNlock]
Locks or unlocks the printer’s keypad.
SET PRN RESET
Rests the printer (Telnet and remote shell only).
SHow PRN STAtus
Shows the printer’s current status (decoded ENQ status bytes).
SHow PRN TEStlabel
Prints a test label.
SHow PRN UPASSwordstatus
Shows the current status of the offline menu user password (on or off).
SET PRN UPASSwordstatus [YEs/NO]
Turns the offline menu user password on or off.
SHowSERVEr
Shows the server parameters.
SHowVErsion
Shows the server firmware version.
UPTIME
Shows how long the printer has been on in format hh:mm:ss up N day(s), hh:mm:ss.
Setup Commands
SET PRN BACkfeedcontrol [ACtion/ DISPenseposition/ DISTance] value
Sets the specified backfeedcontrol parameter to the specified value.
SHow PRN BACkfeedcontrol {ACtion/ DISPenseposition/ DISTance}
Shows the specified backfeedcontrol parameter’s current setting. If no parameter is specified, it shows the
current settings of all parameters in the backfeedcontrol category.
SET PRN BATchoptions[CLearfields/ NUmberofparts/ CUTOption/ CUTMultiple/
PRintmultiple/ QUantity] PRompt [YEs/ NO]
Turns on or off the specified batch entry prompt. These parameters also have corresponding values, such as
“cut last ticket” for CUTOption.
SET PRN BATchoptions [CLearfields/ NUmberofparts/ CUTOption/ CUTMultiple/
PRintmultiple/ QUantity] value
Sets the specified batchoptions parameter to the specified value.
SET PRN BATchoptions [CUTLTicketprompt/ CUTAfterbatchprompt/
NOCutbeforeprompt/ CUTLStripprompt] [YEs/ NO]
Sets the specified batchoptions parameter’s current setting. If no parameter is specified, it shows the current
setting of all parameters in the batchoptions category.
SHow PRN BATchoptions {CLearfields/ NUmberofparts/ CUTOption/ CUTMultiple/
CUTLTicketprompt/ CUTAfterbatchprompt/ NOCutbeforeprompt/ CUTLStripprompt/
PRintmultiple/ QUantity}
To Next Page
Loading...