Console Commands3-5
Shows the specified batchoptions parameter’s current setting. If no parameter is specified, it shows the
current settings of all parameters in the batchoptions category.
SET PRN COMmunication [BAudrate/ WOrdlength/ STopbits/ PArity/ FLowcontrol/
PPort/ PMode] value
Sets the specified communication parameter to the specified value.
SHow PRN COMmunication {BAudrate/ WOrdlength/ STopbits/ PArity/ FLowcontrol/
PPort/ PMode}
Shows the specified communication parameter’s current setting. If no parameter is specified, it shows the
current settings for all parameters in the communication category.
SET PRN CONtrolcharacters [STartheader/ PAramseparator/ QUotedstrings/
FIeldseparator/ ENDheaderDAtaescape/ IMmediatecmd/ ENQRequest/
ENQTerminator/ JObterminator] value
Sets the specified control character to the specified value. Setting the immediate command character
enables immediate commands; setting the ENQ status request character enables ENQ status polling.
SHow PRN CONtrolcharacters {STartheader/ PAramseparator/ QUotedstrings/
FIeldseparator/ ENDheader/ DAtaescape/ IMmediatecmd/ ENQRequest/
ENQTerminator/ JObterminator}
Show the specified control character’s current setting. If no parameter is specified, it shows the current
settings of all parameters in the control characters category.
CLear PRN CONtrolcharacters [DAtaescape/ IMmediatecmd/ ENQRequest/
ENQTerminator/ JObterminator]
Clears the specified control character. Clearing the immediate command character disables immediate
commands. Clearing the ENQ status request character disables ENQ status polling.
SHow PRN INFo {MOdel/ SErial/ FIrmversion/ BOotversion/ COntrastpot/
PIcversion/ KNifeversion/ RFidversion/ NEtworkversion/ TOtals}
Shows the specified info parameter. If no parameter is specified, it shows all parameters in the info
category.
SET PRN MEMoryconfig [DOwnloadablefonts/ FORmat/ IMage/ REceive/ TRansmit/
VEctorfonts] value
Sets the specified buffer’s size the specified value.
SHow PRN MEMoryconfig [DOwnloadablefonts/ FORmat/ IMage/ REceive/ TRansmit/
VEctorfonts]
Shows the specified buffer’s current size. If no buffer is specified, it shows the current sizes of all buffers.
SET PRN MONetary [MOnetarysign/ SEcondarysign/ DEcimaldigits] value
Sets the specified monetary parameter to the specified value.
SHow PRN MONetary {MOnetarysign/ SEcondarysign/ DEcimaldigits}
Shows the specified monetary parameter’s current setting. If no parameter is specified, it shows the current
settings of all parameters in the monetary category.
SET PRN PRIntcontrol [COntrast/ PRintoposition/ MArginposition/ SPeed/
PHeadwidth] value
Sets the specified printcontrol parameter to the specified value.
SHow PRN PRIntcontrol {COntrast/ PRintoposition/ MArginposition/ SPeed/
PHeadwidth}
Shows the specified printcontrol parameter’s current setting. If no parameter is specified, it shows the
current settings of all parameter’s in the print control category.
SET PRN QUEuecontrolREpeat
Repeats last printed batch.
CLear PRN QUEuecontrol [ALlcancel/ CUrrentcancel/ ABorterror/ Reseterror]
Performs the specified action.
SHow PRN STOrageFLash
Shows the amount of unused flash memory.
To Next Page
Loading...