Using a Web Browser2-1
USING A WEB BROWSER
You can configure and manage the printer using a Web browser. The recommended minimum
screen resolution for your computer is 1024 x 768 pixels. Before you begin, you need to know your
printer’s IP address. The printer should be turned on and ready to receive data.
Note: The screens shown in this manual may not exactly match what you see.
It may take about a minute, depending on network traffic, for the printer to connect to an access
point. When the printer is connected and ready to receive data you see:
The printer’s display shows the antenna symbol when the printer is connected and ready to receive
data.
Logging In
1. Start your Web browser.
2. Type in your printer’s IP address and press Enter. For example, 192.0.0.192.
If the printer is experiencing a ribbon or supply problem, the icon for Printer Status appears
with a red background.
If the printer has a wireless connection, the signal strength icon appears.
The power status shows AC or DC (using a Mobile Work Station) depending on your
connection.
3. Click Log In or the printer’s name (for example: PXR8A983A).
To Next Page
Loading...