Adjusting the Mounting Bracket
1. Use the 4mm Hex key provided to loosen the screw at the head of the mounting bracket.
2. Adjust the head as required.
3. Tighten the screw to secure the head.
Cleaning and Maintenance
CAUTION — Do not clean glass window with ethyl alcohol, solvents, hydrogenated hydrocarbide,
strong acid, or alkali. Such cleaning products may irreparably damage the surface.
Glass Window
If the video image becomes blurry or smudged in areas, it may be because the housing's glass window requires
cleaning.
To clean the glass window:
l Use hand soap or a non-abrasive detergent to wash off dirt or fingerprints.
l Use a microfiber cloth or non-abrasive fabric to dry the dome bubble.
Important: Failure to use the recommended cleaning materials may result in a damaged or scratched glass
window. A damaged glass window may negatively impact image quality and cause unwanted IR light reflecting
into the lens.
Body
l Use a dry or lightly dampened cloth to clean the camera and housing body.
l Do not use strong or abrasive detergents.
Adjusting the Mounting Bracket 20
To Next Page
Loading...
