5. Arrange and feed the required cables through the conduit. Pull the cables through the side conduit
entry hole on the junction box.
6. Screw the conduit into the side conduit entry hole on the junction box. The side conduit entry hole is
compatible with 1/2" conduit pipes.
Use the provided lock nut to screw on to the end of the inserted conduit to secure it in place.
7. Pull the required cables through the rubber sealing grommet. For more information, see Inserting
Cables through the Sealing Grommet on page11.
Using the Junction Box Mounting Adapter 20
To Next Page
Loading...
