c. Lock the latch back into position when the camera head is in the desired position.
2. In the camera web browser interface, adjust the camera’s Image and Display settings to achieve the
desired image parameters and position.
Zooming and Focusing the DomeCamera
Ensure this procedure is performed after the dome cover is installed, so you can accommodate for the focus
shift caused by the dome bubble.
l
In the camera web browser interface or the Avigilon Control Center software, use the camera’s Image
and Display settings to zoom and focus the camera.
a. Use the zoom buttons to zoom the camera in or out.
b. Click Auto Focus to focus the lens.
c. Use the focus near and far buttons to manually adjust the focus.
Zooming and Focusing the DomeCamera 36
To Next Page
Loading...
Need help?
General
