To delete a profile,
1. From the Image tab dialog box, click “Profiles” to prompt the Edit Your Profile
dialog box.
2. Choose the profile you want to delete from the dropdown list box.
3. Click “Delete”. A Confirm message “Are you sure you want to delete this
profile?” is prompted.
4. Choose “Yes” to delete or “Cancel” to quit.
To rename a profile,
1. From the Image tab dialog box, click “Profiles” to prompt the Edit Your Profile
dialog box.
2. Choose the profile you want to rename from the dropdown list box and then
click the Rename button.
3. Enter new name for the profile.
4. Choose “Save” to save the new profile or “Cancel” to quit.
Note:
The preset default profiles include Flatbed, Simplex-B&W, 200 dpi, Simplex-Gray,
200 dpi, Simplex-Color, 200 dpi, Duplex-B&W, 200 dpi, Duplex-Gray, 200 dpi,
Duplex-Color, 200 dpi. If you have a simplex or a sheetfed scanner, the duplex or
the flatbed option will not be available.
To Next Page
Loading...
