Scanning From One Touch of the Buttons
1. Adjust the paper guide for the width of paper and load the document with
their tops into the automatic document feeder.
2. Use ▼ to scroll down to [BM2 Air] on the LCD display.
3. Check the button (function) number on the LCD screen to ensure if you are
selecting the proper scan settings and destination application. (For example,
if you wish to scan with button (function) 3, “Scan to App”, which opens
Microsoft Paint and displays the scanned image in the window of Microsoft
Paint, the LCD screen should show “Function 3”).
4. Press the Scan button on the scanner.
5. After the scanning is finished, the Microsoft Paint software will be launched
and the scanned image appears in the main window of Microsoft Paint as
below.
Note:
1. For details information on how to use the Button Manager V2, please refer to
the user’s manual in the supplied CD.
2. You may also use Button Manager V2 on your desktop by starting Button
Manager V2 from All Programs or double clicking the Avision Scanner Utility from
the Control Panel.
To Next Page
Loading...
