Avision AN360 - Pre-Installation Information

7
Pre-installation Information
Preinstallation
The product has to be setup properly on your network to perform E-mail and
filing functions. The following network parameters have to be set.
Important!
Make a copy of the following table and ask your Network Administrator
to complete the information.
1. DHCP Enable:
2. IP Address:
. . .
3. Subnet Mask:
. . .
4. Gateway IP:
. . .
5. DNS Server:
. . .
6. Mail Server:
. . .
7. Port # of Mail
Server
Explanation of contents:
1. *DHCP Enable:
Choose Yes to obtain IP/subnet/gateway/DNS
server/WINS server addresses automatically
from DHCP server.
2. *IP Address:
The Internet Protocol (IP) address assigned to
your machine by your network administrator or
by DHCP server.
3. Subnet Mask:
The net mask address assigned by your
network administrator or by DHCP server.
4. Gateway IP:
The gateway IP address assigned by your
network administrator or by DHCP server or by
DHCP server.
5. *DNS server:
The IP address of DNS server assigned by your
network administrator.