Mode: None, Page Number, Memory Size.
This option allows you to assign a specified memory
size from the available RAM to process the image
data. By specifying a smaller memory size, you can
free more memory for other applications you are
running. By specifying a larger memory size, you can
have more memory to process the image data
especially when you have a large amount of
documents needed to be scanned.
You can also specify your memory size by the page
number. For your information, an A4 color document
scanning at 300 dpi consumes approximates 24MB.
Image Count
When the selected cache mode is “none”, the image
count option allows you to assign number of pages
you need to scan. For example, if you wish to scan the
first two pages, simply move the page slider to 2, and
the scan action will be stopped when the scanning of
the first two pages have been completed.
Check to show the warning messages such as “ADF
pad count exceeds 50,000 scans (the number varies
based on type of scanner). Please replace the ADF pad
and reset the pad count.”
Check to save your scanner properties settings after
leaving the dialog box. Next time when you open the
Scanner Properties dialog box, the previously saved
settings will be shown.
To Next Page
Loading...
