2. Verify that the paper guides are aligned with the edges of the
stack.
Note: The [Paper Width] switch:
If your document width is 216 mm (8.5 in.):
If your document width is 216 mm (8.5 in.), slide the [Paper
Width] switch DOWN to fix your paper guide to conveniently
load the letter-size document.
If your document width is larger than 216 mm (8.5 in.):
If your document width is larger than 216 mm (8.5 in.) such as
invoices with punch holes, slide the [Paper Width] switch UP
and move the paper guide to the right end to load your
documents.
Slide DOWN the [Paper
Width] switch to set your
paper width to 216 mm
(8.5 in.)
Slide UP the [Paper
Width] switch to set
your paper width larger
than 216 mm (8.5 in.)
To Next Page
Loading...
