Chapter 4: Web Interface Operations 51
2. In the Server Name column, click the server you want to modify.
Figure 4.9: Modify Server Name Window
3. Type the new name. Names must be 1-15 characters, include alphabetical characters, and may
not include spaces or special characters with the exception of hyphens.
4. Click Save. The new name is updated in both the AutoView switch and local client database.
Viewing the IQ modules and IACs
Selecting Servers - AVRIQs lets you view IQ modules and IACs in your system, their path,
Electronic ID number (EID), their type and the device to which it is connected.
You can also view the IQ module status. A green circle indicates that the IQ module is online. A
yellow circle indicates the IQ module is being upgraded and a red X indicates that the IQ module is
offline. To clear offline IQ modules, click Clear Offline AVRIQs and click OK when prompted. The
Clear Offline AVRIQs button is only available for AutoView switch administrators.
NOTE: It is not possible to clear offline IQ modules that are attached to a cascaded analog switch.
NOTE: User access rights will also be updated to remove the servers associated with the cleared offline IQ
modules.
The AVRIQ Language drop-down menu allows you to set language and keyboard parameters for
all the Sun/USB IQ modules being used with the switch. The AVRIQ Language drop-down menu
is only available for switch administrators.
NOTE: The Reboot Required button will only appear if a reboot is required.
Viewing and configuring cascaded switch connections
The Cascaded Devices window lets you view the cascaded switches in your system. Clicking on a
switch name displays a window that allows you to change the Name or Number of Channels.
To Next Page
Loading...
Need help?
General