Chapter 3: Local Port Operation 33
Managing Server Tasks Using the OSCAR Interface
From the OSCAR interface Commands dialog box, you can manage your DSR switching system
and user connections, enable the Scan and Broadcast modes and update your firmware.
To access the OSCAR interface Commands dialog box:
1. Press
Print Screen to launch the OSCAR interface. The Main dialog box appears.
2. Click Commands. The Commands dialog box appears.
Figure 3.15: Commands Dialog Box
Table 3.5: Commands to Manage Routine Tasks for Your Target Device(s)
Feature Purpose
Broadcast Enable
Begin broadcasting to your target devices. Configure a target device list for
broadcasting under the Setup dialog box.
Scan Enable
Begin scanning your target devices. Set up a target device list for scanning in the
Setup dialog box.
User Status View and disconnect users.
Display Versions
View version information for the DSR switch as well as view and upgrade firmware
for individual DSRIQ modules.
Reset PS/2 Re-establish operation of PS/2 keyboard and mouse.
To Next Page
Loading...
Need help?
General