PAGE 27
Operation via Display and Keypad
–Via the
Select
softkey you reach the option
PRETALK Interface
.
– Please mark the desired option via the cursor keys and .
–In the ISDN operating mode you can only activate or deactivate the
Handset
.
– In case of using the analogue POTS operating mode, the following op-
tions are available:
No Device
,
Phone
, and
Handset
.
– Please activate your selection by pressing the
Select
softkey.
– The selection is confirmed by pressing the
Ok
button or via the
Ok
softkey.
– Press the key to get back to the main menu. Now you are asked if
you want to
Save Settings?
. Via the
Yes
softkey the setting is stored per-
manently in the system.
TIP
You reach the settings for the
PRETALK Interface
directly via the key se-
quence:
Menu 1 4
To Next Page
Loading...
