PAGE 51
Windows PC Software
5.6.1.1.5 Equalizer
With the use of the Equalizer the acoustic properties of the caller signal can
be adjusted easily.
FIG. 19 EQUALIZER
Bass
• Via the slide control Bass Boost the bass can be boosted in the range of 0
and 12 dBu. The default value is 0 dBu.
• The lower cut-off frequency of the bass boost can be changed using the
Bass Boost Frequency control. The cut-off frequency can be set to 50 Hz,
100 Hz and 200 Hz. The default value is 100 Hz.
Treble
• Using the slide control Treble Boost you can boost the treble in the range
of 0 and 12 dBu. The default value is 0 dBu.
To Next Page
Loading...
