PAGE 74
Windows PC Software
5.7.3 Submenu Software Download
The required firmware for the MAGIC TH2 system is always included in the
PC software: Via the Software Download you can comfortably download the
firmware on your system.
By using the Browse button you select the firmware file. It is always located
in the same directory in which you installed the MAGIC TH2 application. The
standard installation directory is:
C:\Program Files\MAGIC TH2
The file name of the firmware is āth2.sswā.
FIG. 43 SUBMENU SOFTWARE DOWNLOAD
Please press the Start button to download the firmware. The Progress bar
displays the progress of the download. The process is finished after about
three minutes. If the download was successful, a corresponding message is
displayed. After your confirmation the system is reset.
NOTICE
If the download was not successful, you can simply switch off the unit and
switch it on again. The new software is only written in the flash memory if
the download was successful. Otherwise the old firmware is maintained.
To Next Page
Loading...
