PAGE 61
Windows PC Software
– Disconnect
– Calling
– Incoming call
– Connect
Under Line (only in the ISDN operating mode) you select the line whose
status you want to signalise. In addition to Line 1 and Line 2 you can mon-
itor the connection status of both lines if you select the option All Lines.
As soon as one of the two lines meets the criteria, the relay is closed.
– Audio Line : Via this function you can signalise the currently selected Au-
dio line. Please select under Audio line the desired Audio line PRETALK,
HOLD or ON AIR.
–Under Line (only in the ISDN operating mode) you select the line whose
status you want to signalise. In addition to Line 1 and Line 2 you can mon-
itor the Audio status of both lines if you select the option All Lines. As
soon as one of the two lines meets the criteria, the relay is closed.
– System Alarm: If one of the possible system errors ((see CHAPTER 5.8.2)
occurs, it can be signalised by selecting this option.
To Next Page
Loading...
