30
How to check an existing preset point
In “Available Positions”, select the name of the point you want to check from the drop-down list, and
click “Goto”.
You will see the camera view on the right side moving to the point it’s recorded.
How to delete an existing preset point
In “Available Positions”, select the name of the point you want to check from the drop-down list, and
click “Remove”.
Cruise
Note: Before using this function, make sure you have finished setting several preset points.
Here defines how the auto mode of the camera is going to work when is selected: Sequence, Auto
Pan or Cruise.
Cruise
When “Cruise” is selected here and
is clicked on the live view page, the camera will start cruising.
This function is used to record the monitoring route you want up to 200 seconds. Up to four cruise
routes could be saved in this menu. You could also preview and remove the routes as needed.
Auto Pan
When “Auto Pan” is selected here and
is clicked on the live view page, the camera will start
panning.
To Next Page
Loading...
