3
1.5 CAMERA MODE, ID & BAUD RATE SETUP
This camera could be used as an IP camera, a TVI camera and an AHD camera. Before connecting this camera to any
recorder, you may need to manually set the camera mode, ID & baudrate for the camera to work properly. Plase check
the description below for details.
WHERE TO SET
Remove the panel as indicated below to find the dip switch.
SET TO IP CAMERA
Mode:
SET TO TVI CAMERA
Mode:
You might need to set the ID and baud rate if you’re connecting to other brand’s TVI DVR:
ID:
The ID number can be set from 0~255 (binary).
Please check the examples below.
Baud Rate:
To Next Page
Loading...
