15
3.4 CAMERA GUARD
This function is used to lock the camera to a fixed point and no pan action could be made until the lock mode
is disabled. Before using this function, make sure:
You have an iOS or android mobile device with our free app, EagleEyes, installed.
Your TVI DVR is connected to Internet, and registered in the address book of EagleEyes.
NOTE: To know how to connect the DVR to Internet, please refer to its user manual.
Step1: In the live view, and right click to show the main menu.
Select ADVANCED CONFIG DCCS. Then, select the channel which connects this camera,
and click SETUP to enter the menu of camera parameters.
ADVANCED CONFIG
C A M E R A CH1 CH2 CH3 CH4
DETECTION MENU SETUP
ALERT
NETWORK
DISPLAY
RECORD
DEVICES F.W. 1016
DCCS DEVICE AVTXXX
NOTIFY CONNECTION OK
EXIT
Step2: Select CAMERA GUARD, and enable this lock function. Then, configure the timeout after
which the camera will be fixed to the current point and any attempt to pan the camera to another
point will be failed.
CAMERA GUARD
GUARD LOCK ON
TIMEOUT (SECS) 30
Step3: Go to EagleEyes on your mobile phone or tablet, and access your TVI DVR. Then, click on the
channel with this camera connected, and choose any of the following methods to move the
camera to the point you want:
To Next Page
Loading...
Need help?
General
