29
Network Failure Detection
Configure this camera to check the network connection of other device periodically, and send
notifications via Email or FTP for disconnection events.
4.3.2 Camera
Camera
In this menu, you can set the camera title, OSD display, and location to save snapshots.
Note: The actual functions shown depend on the model you have.
Preset
Note: Before using this function, make sure the DPTZ function is enabled.
You can set new preset points (up to 16) or check existing points here.
How to set a new preset point
Step1: Click to where you want to see, and you’ll get a 5x zoom-in image. To slightly zoom out, draw a
square from the bottom right to top left, and you’ll get a 3x image. Draw the square again and
you’ll return to the original size.
Step2: In “Current Position”, give a name to this point, and click “Add”.
To Next Page
Loading...
Need help?
General
